SAW BLADES
LEUCO G7 Tungsten Carbide NF Chop Saw Blade
$427.24
● IN STOCK
Confused about compatibility?
Ask our AI Advisor about feed rates, machine compatibility, and custom applications for this tool.
Description
The LEUCO G7 is the benchmark for burr-free, smooth cutting of aluminum window and façade profiles and PVC profiles on clipping, miter, and table saws. Its "G7" group tooth geometry reduces cutting pressure, and special laser ornaments make it exceptionally quiet in the cut.
Full details, features, and machine fit are under Details below.
VENDOR: LEUCO Circular Saw Blades
| Size / Variant | Price | SKU | Stock |
|---|---|---|---|
| 300 x 3.2 x 30mm, Z98, +5° hook | $427.24 | 192663 | In Stock |
| 350 x 3.2 x 30mm, Z98, +5° hook | $477.09 | 192662 | In Stock |
| 400 x 3.8 x 30mm, Z98, +5° hook | $561.51 | 192659 | In Stock |
| 420 x 3.8 x 30mm, Z98, +5° hook | $570.13 | 192660 | In Stock |
| 420 x 3.8 x 32mm, Z98, +5° hook | $571.63 | 193361 | In Stock |
| 500 x 4.0 x 30mm, Z126, +5° hook | $767.91 | 192661 | In Stock |
| 600 x 4.6 x 32mm, Z140, +5° hook | $1,118.70 | 80494197 | In Stock |
| 250 x 3.2 x 30mm, Z84, -6° hook | $318.30 | 192965 | In Stock |
| 300 x 3.2 x 30mm, Z98, -6° hook | $427.24 | 192568 | In Stock |
| 350 x 3.2 x 30mm, Z112, -6° hook | $477.09 | 192275 | In Stock |
| 350 x 3.2 x 32mm, Z112, -6° hook | $479.19 | 193355 | In Stock |
| 350 x 3.5 x 30mm, Z98, -6° hook | $492.94 | 192274 | In Stock |
| 350 x 3.8 x 40mm, Z84, -6° hook | $507.34 | 192273 | In Stock |
| 380 x 3.8 x 32mm, Z112, -6° hook | $624.30 | 192567 | In Stock |
| 400 x 3.8 x 30mm, Z98, -6° hook | $561.51 | 192276 | In Stock |
| 400 x 3.8 x 30mm, Z126, -6° hook | $717.39 | 193356 | In Stock |
| 400 x 3.2 x 32mm, Z126, -6° hook | $717.39 | 193357 | In Stock |
| 420 x 4.0 x 30mm, Z98, -6° hook | $570.13 | 192277 | In Stock |
| 450 x 3.8 x 30mm, Z112, -6° hook | $669.04 | 192278 | In Stock |
| 450 x 3.8 x 32mm, Z112, -6° hook | $670.50 | 193358 | In Stock |
| 450 x 3.8 x 32mm, Z126, -6° hook | $746.23 | 193359 | In Stock |
| 500 x 4.0 x 30mm, Z126, -6° hook | $767.91 | 192279 | In Stock |
| 500 x 4.0 x 32mm, Z126, -6° hook | $769.37 | 193360 | In Stock |
| 550 x 4.0 x 30mm, Z133, -6° hook | $871.80 | 192392 | In Stock |
| 600 x 4.6 x 32mm, Z140, -6° hook | $1,059.51 | 193341 | Out of Stock |
Specifications for SKU: 192663
| Diameter - Outermost cutting point [mm] | 300 |
| Bore / shank diameter [mm] | 30 |
| Cutting width 1 [mm] | 3.2 |
| Clamping length [mm] | 2.5 |
| Pin holes [mm] | 2/7/42 + 2/9/46 + 2/10/60 + 2/11/70 |
| Tooth configuration | G7 [G7] |
| Number of teeth | 98 |
| Number of teeth diameter [mm] | 98 |
| Cutting material specification | HL Board 06 [B06] |
| Cutting material group | Tungsten carbide [HW] |
| Diameter max [mm] | 300 |
| Diameter [mm] | 300 |
| Cutting direction | Universal [UNI] |
| Type of feed | Universal [UNI] |
| Weight Kg | 1.346 |
| RPM max [min-1] | 6400 |
| Cutting quality | ++++ [4] |
Application
- —clipping and miter cuts in PVC profiles
- —for burr-free and smooth cuts in aluminum window and façade profiles
Machines
- —clipping and miter saws
- —table saws
Design
- —positive or negative hook angle
- —tooth configuration: "G7"
- —cutting material: HW HL Board 06
Advantages
- —reduced cutting pressure thanks to group tooth geometry
- —excellent burr-free cuts with low roughness thanks to tooth partition
- —extremely noise-reduced thanks to special laser ornaments
- —increased edge life compared to chop saw blades with tooth configuration "TR-F"
- —increased performance and economic efficiency
Published by LEUCO. Opens on leuco.com.
The LEUCO G7 is the benchmark for burr-free, smooth cutting of aluminum window and façade profiles and PVC profiles on clipping, miter, and table saws. Its "G7" group tooth geometry reduces cutting pressure, and special laser ornaments make it exceptionally quiet in the cut.
- Excellent burr-free cuts with low roughness thanks to tooth partition
- Reduced cutting pressure from the G7 group tooth geometry
- Extremely noise-reduced thanks to special laser ornaments
- Longer edge life than "TR-F" configuration chop blades
- Tungsten carbide (HW), HL Board 06 cutting material
Notes: Secure workpiece clamping required. Max. wall thickness 5 mm. Positive (+5°) hook blades suit general chop/table saw use; negative (−6°) hook blades are specified for the machines listed below.
| Part No. | Size (D x kerf x bore) | Teeth | Hook | Machine fit |
|---|---|---|---|---|
| 192663 | 300 x 3.2 x 30mm | 98 | +5° | Universal |
| 192662 | 350 x 3.2 x 30mm | 98 | +5° | Universal |
| 192659 | 400 x 3.8 x 30mm | 98 | +5° | Universal |
| 192660 | 420 x 3.8 x 30mm | 98 | +5° | Universal |
| 193361 | 420 x 3.8 x 32mm | 98 | +5° | Universal |
| 192661 | 500 x 4.0 x 30mm | 126 | +5° | Universal |
| 80494197 | 600 x 4.6 x 32mm | 140 | +5° | Schüco |
| 192965 | 250 x 3.2 x 30mm | 84 | -6° | Universal |
| 192568 | 300 x 3.2 x 30mm | 98 | -6° | Universal |
| 192275 | 350 x 3.2 x 30mm | 112 | -6° | Universal |
| 193355 | 350 x 3.2 x 32mm | 112 | -6° | Emmegi |
| 192274 | 350 x 3.5 x 30mm | 98 | -6° | DeWALT, Haffner, Pfeiffer, Rotox |
| 192273 | 350 x 3.8 x 40mm | 84 | -6° | Eisele LSM II/-PV/VA-L, Graule, Ulmia, Weidmann |
| 192567 | 380 x 3.8 x 32mm | 112 | -6° | Elumatec |
| 192276 | 400 x 3.8 x 30mm | 98 | -6° | DeWALT, Haffner |
| 193356 | 400 x 3.8 x 30mm | 126 | -6° | Rapid |
| 193357 | 400 x 3.2 x 32mm | 126 | -6° | Emmegi |
| 192277 | 420 x 4.0 x 30mm | 98 | -6° | Rapid, ELU |
| 192278 | 450 x 3.8 x 30mm | 112 | -6° | DeWALT, Haffner |
| 193358 | 450 x 3.8 x 32mm | 112 | -6° | Emmegi |
| 193359 | 450 x 3.8 x 32mm | 126 | -6° | Emmegi |
| 192279 | 500 x 4.0 x 30mm | 126 | -6° | Pfeiffer, Rapid |
| 193360 | 500 x 4.0 x 32mm | 126 | -6° | Emmegi |
| 192392 | 550 x 4.0 x 30mm | 133 | -6° | Pfeiffer, Rapid, Elumatec |
| 193341 | 600 x 4.6 x 32mm | 140 | -6° | Pfeiffer, Rapid |
- Product Type
- Saw Blades
- Vendor
- LEUCO Circular Saw Blades
- Tags
- AluminumCircular Saw BladesG7Metric ProgramMiter SawsNF Chop SawsPVC